So my flywheel threw it's magnets a while back. I replaced it with a gen2 one (doing the mod to fit it to my -88). Also replaced the CCT.
But my bike still refused to start, so I bought new spark plugs, installed them and cleaned out the caps. I tested for spark and both sides have spark...
Hello, this is my first post here. I recently picked up a 1988 Kawasaki EX500 for €250 as a project, I’m a beginner with some knowledge.
The video linked above is an attempt at starting the bike but it makes a bit of a “grinding” noise I’d...
I recently replaced the starter motor and relay and the motorcycle won't turn over or crank still. I replaced all fuses but only turn signals and hazards work now. what might be my issue. might the ignition switch be to blame?
This will be a long post, so please bear with me...
Keep in mind: I live in Germany, and the temperatures currently are around 40 degrees (F).
also, I am a newbie to bikes, and do not know how to properly trouble shoot them.
I bought an abandoned 1993 500 R (GPZ 500 S in Europe) with...
Here's my 1987 Ninja EX500-A. I have been working on it for a few months now and have yet to get it to start.
Things I've done:
I have replaced spark plugs, checked all fuses, went through the entirety of the wiring harness with a multimeter, labeled all plugs and wires.
Things im doing: