Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Bike ran fine before cleaning coolant tubes and getting new o-rings on them. Put everything back together and when choke is on the bike idles high around 5000 rpm’s. Slowly I take the choke off while bike gets warmed up and idle goes down. Choke taken completely off and bike stalls. Only wants to run while choke is on. Any ideas?
 
1 - 5 of 5 Posts
Top