Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner

1 - 1 of 1 Posts
Joined
·
163 Posts
Discussion Starter · #1 · (Edited)
REFURBED, split, disassembled and cleaned using my standard combination of methods...multiple courses of machine and handiwork. OEM stock jetting Keihin 130 main jets, NEW OEM 35 pilot jets, N36N needles, perfect for your stock airbox/exhaust EX (all years). Pilot screws (tamper proof caps drilled and removed) set to the accepted 2 1/2 turn starting position.

"Trade-ins" from another member with a resolved issue (see pics)....remnants of a partial pilot jet safely removed. These'll now be fine runners while offering a long service life.
  • stainless steel button head hardware all around (all brace threads coated with anti-seize)
  • new orings everywhere (ALL fuel and vent rail, float bowl and pilot screw locations)
  • new float valves, dressed seats
  • immaculate restored factory brass and tuning components
  • throttle plates carefully synched
  • the fabled Kaw rail filter 49019-1085 installed
  • perfect slide action (polished slides)
  • float/fuel levels carefully set, tested, confirmed
  • all circuits confirmed absolutely clear as they came from Mr. and Mrs. Kawasaki and their Uncle Keihin.
  • wet tested, levels tweaked to perfect, test revealed no leaks
  • these are exceptionally clean inside ...will be superb, functional bolt-on runners while delivering a long service life. However, you will need to set idle to your preferred RPM.
$250 shipped in CONUS, Paypal accepted

TRADE IN INFO established registered members please PM for trade in details to lower your costs, its same basic procedure used at your local auto parts store on buying anything with a "core charge"
QUESTIONS please PM for any special needs or further detail. Fellow members thanks for lookin'!

93-1.jpg 93-3.jpg 93-4.jpg 93-5.jpg
 

Attachments

1 - 1 of 1 Posts
Top