Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner
1 - 2 of 2 Posts
Joined
·
176 Posts
Discussion Starter · #1 · (Edited by Moderator)
REFURBED, split, totally disassembled and every component cleaned using my standard combination of methods...multiple courses of machine and handiwork. OEM stock jetting Keihin 130 main jets, 35 pilot jets, N36N needles, perfect for your stock airbox/exhaust EX (all years). Pilot screws (tamper proof caps removed) set to the accepted 2 1/2 turn starting position.

"Trade-ins" from another member, these'll be fine runners while offering a long service life.
  • stainless steel button head hardware all around (all brace threads coated with anti-seize)
  • new orings everywhere (ALL fuel and vent rail, float bowl and pilot screw locations)
  • new float valves, dressed seats
  • immaculate restored factory brass and tuning components
  • throttle plates carefully synched
  • the fabled Kaw rail filter installed
  • perfect polished slide action (confirmed via testing)
  • float/fuel levels carefully set, tested, confirmed
  • all circuits confirmed absolutely clear as they came from Mr. and Mrs. Kawasaki and their Uncle Keihin.
  • wet tested, levels tweaked to perfect, test revealed no leaks
  • these beauties will be superb, functional bolt-on runners while delivering a long service life. However, you will need to set idle to your preferred RPM.
  • choke and joining braces are powdercoated black
$250.....after trade in is secured.

TRADE IN INFO/DETAILS established registered members please PM for trade in details, its same basic procedure used at your local auto parts store on buying anything with a "core charge"
QUESTIONS please PM for any special needs or further detail, fellow members thanks for lookin'

Motor vehicle Gas Machine Auto part Metal


Motor vehicle Gas Automotive exterior Auto part Machine


Motor vehicle Gas Machine Cylinder Nickel
 
1 - 2 of 2 Posts
Top