Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner

1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi all, replaced the fuel lines from tal since they were cracking, but after I took the tank off I made the Im mistake to remember what goes where. Am I about to do this right??
 

Attachments

·
Premium Member
Joined
·
3,697 Posts
Glad you got it figured out, but just to make sure, the small line from the petcock goes to the vacuum nipple at the top of the left carburetor, the fuel line goes to the connection on the lower rail and the upper rail connection is the float bowl vent. It goes to a tube that goes down to the bottom of the frame, or just make sure it faces down and leave it without a hose.

BTW, I'm moving this thread to the Carburetor section. Trying to keep things organized :smile2:
 

·
Super Moderator
Joined
·
6,046 Posts
@NingieChop

Does this help you out any?

1. Fuel line
2. Vacuum line to petcock
3. Vacuum line to pair valve
4. Carb vent line ( just routes to in front of the swing arm, doesn't connect to anything, can be disconnected all together if you like)
 
  • Like
Reactions: akfred

·
Super Moderator
Joined
·
6,046 Posts
^
 
1 - 6 of 6 Posts
Top