Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner

1 - 6 of 6 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter #1
Any trick to this?? Can't get the two plates to seperate and don't want to force them off and end up breaking something.
 

·
Registered
Joined
·
5 Posts
You just need to jam a really small screw driver in between the 2 plates to break the gasket and pry it apart, after you get it apart dont forget the impellor is reverse threaded.
 

·
Registered
Joined
·
19,363 Posts
Try tapping a knife blade into the gasket between the cover and the seal plate. Then a screw driver. the cover is held by 2 hollow dowels as well as the sticky gasket.

FOG
 

·
Registered
Joined
·
100 Posts
Discussion Starter #4
thanks. Will work on it somemore after work tonight.
-
I plan on taking pics of the transmission swap, step by step.
 

·
Registered
Joined
·
19,363 Posts
I don't know if you are aware of it but, you don't need to disturb the head or the crankshaft to change the transmission.

FOG
 

·
Registered
Joined
·
100 Posts
Discussion Starter #6
yes. You actully gave me the lowdown in another thread on here.- will be using those directions.
thanks!
 
1 - 6 of 6 Posts
Top