Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner
1 - 6 of 6 Posts
207 Posts
Discussion Starter · #1 ·
REFURBED, split, totally disassembled and every component cleaned using my standard combination of methods...multiple courses of machine and handiwork. OEM stock jetting Keihin 130 main jets, 35 pilot jets, N36N needles, perfect for your stock airbox/exhaust EX (all years). Pilot screws (tamper proof caps removed) set to the accepted 2 1/2 turn starting position.

"Trade-ins" from another member, these'll be fine runners while offering a long service life.
  • stainless steel button head hardware all around (all brace threads coated with anti-seize)
  • new orings everywhere (ALL fuel and vent rail, float bowl and pilot screw locations)
  • new float valves, dressed seats
  • immaculate restored factory brass and tuning components
  • throttle plates carefully synched
  • the fabled Kaw rail filter installed
  • perfect polished slide action (confirmed via testing)
  • float/fuel levels carefully set, tested, confirmed
  • all circuits confirmed absolutely clear as they came from Mr. and Mrs. Kawasaki and their Uncle Keihin.
  • wet tested, levels tweaked to perfect, test revealed no leaks
  • these beauties will be superb, functional bolt-on runners while delivering a long service life. However, you will need to set idle to your preferred RPM.
  • choke and joining braces are powdercoated black
SOLD.....after trade in is secured.

TRADE IN INFO/DETAILS established registered members please PM for trade in details, its same basic procedure used at your local auto parts store on buying anything with a "core charge"
QUESTIONS please PM for any special needs or further detail, fellow members thanks for lookin'
Hood Vehicle Automotive lighting Automotive tire Bumper

Motor vehicle Automotive exterior Gas Bumper Automotive design

White Light Rim Engineering Machine

Motor vehicle Automotive design Gas Automotive exterior Auto part

· Administrator
07 Ducati SS800 '95 Ducati 900SS/SP '19 Honda CBR650R
16,616 Posts
Yo, glad you joined up here, welcome to a wealth of info.... both old and new. I'm sure you'll let me know when you get them.

· Registered
911 Posts
Will u come remove and install if I buy your trade in carb? 🤣🤣
To me that's the worst part.
Any who, it's time to clean my carb. Mine is making the bike buck and hard to idle. I would love to throw in another one while I'm pulling the dirty one out. What's your cost?
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.