Ex-500.com - The home of the Kawasaki EX500 / Ninja 500R banner
1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hey guys can someone please tell me which way my vortex sprocket should face? Top is the new sprocket with logo out, middle is original sprocket, and bottom is the new sprocket with the lip facing out. Just not 100% sure on this, thanks
Automotive tire Vehicle Automotive design Alloy wheel Automotive lighting

Crankset Gear Bicycle part Bicycle chain Wood

Automotive tire Alloy wheel Gear Rim Auto part
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #6 ·
Thank you for the replies
remove original, lay it in original direction on flat surface....compare with new comparing heights in both directions....should become obvious
Thanks all for the replies. So that considered, I should use pic 3? Since they're the same on the side whith no logo, but on the Sunstar/Vortex side they both have a lip, it's just that the Sunstar has a lip that meets up with the sprocket holding plate bolts, and the vortex sprocket doesn't. I don't know if this matters but my chain has been making a whirring sound since I installed it and I'm trying to get my alignment right and stop this sound.
 
1 - 3 of 3 Posts
Top